LAMBDA
AUDIO
Coming with 1.0
User guide / 05 / 06Harshness controlComing with 1.0

Lambda Audio / VST3 + experimental Audio Unit

Tame.

Find the harsh peaks as they ring and turn down only those, while the rest of the sound stays put.

Tame editor tracking a resonance near 1 kHz, with the input spectrum, its reduction and the Sensitivity Map
Tame plug-in windowActual plugin UI
BuildComing with 1.0
FormatVST3 + experimental Audio Unit
AvailabilityShips with 1.0
Reading timeAbout 5 min
On this page

Tame finds the harsh, ringing frequencies in a sound and turns down only those, only while they ring. That covers the whistle in a vocal, the ring of a snare and the shrill edge of a guitar. Everything else stays as it was.

Install and open

You need a Mac with Apple silicon on macOS 13 or newer, or a 64-bit PC on Windows 10 or 11.

  1. Save your project and quit your DAW (your music software).
  2. Run the installer.
  3. Open your DAW. If Tame doesn't appear, ask the DAW to rescan plug-ins.
  4. Add Lambda Audio → Tame to the track as an effect.

To start your 30-day free trial or enter a licence, click License / trial at the bottom left of the plug-in and sign in to your free Lambda Audio account. When the trial ends, Tame lets your audio through untouched until you activate it, so your projects still open and play.

On a Mac, Tame comes as a VST3 and as an Audio Unit. The Audio Unit is still experimental. If anything goes wrong, click Support next to License / trial and send the file it makes to support@lambdaaudio.com.

Quick start

  1. Add Tame to the track that sounds harsh.
  2. Click the preset name at the top and choose Gentle polish. You can also pick a preset named after your sound, such as "Vocal de-ess high" or "Snare ring".
  3. Play the track and turn Depth up until the harshness settles.
  4. Set Listen to Delta. Now you hear only what Tame is taking away. It should sound like the harsh part and little else. If you can hear the body or the attack of the instrument, turn Depth down.
  5. Set Listen back to Output.

The main controls

Control What it does
Depth How strongly Tame turns down what it finds. This is the main control.
Max Cut The most Tame will ever turn anything down. A safety limit.
Prominence How much a frequency has to stick out before Tame touches it. Raise it to catch only the worst peaks.
Detail Higher values aim at narrower peaks.
Attack How quickly Tame reacts when a frequency starts to ring.
Release How quickly the sound comes back once it stops ringing.
Transient Protects the start of each note or hit, so drums and plucks keep their punch.
Mix Blends the processed sound with the original.
Output The final volume.

Character decides what Tame listens for. Relative (the usual choice) looks for frequencies that stick out from their neighbours. Driven also reacts to how loud they are, and Drive sets how much.

Bypass plays the original sound so you can compare.

Hover over any control to read what it does. To adjust a control, drag it. Hold Shift for fine moves, and double-click to reset it.

The Sensitivity Map

The curve with eight points across the display tells Tame where to listen. Drag a point up to make Tame more eager in that range, and down to make it leave that range alone. Moving the map doesn't boost or cut anything by itself. It only changes where Tame listens.

Low and High set the range of frequencies Tame works in at all.

Finer control

You can leave all of these as they are.

  • Harmonic stops Tame from cutting the natural overtones of a sung or played note. It starts at zero. Try a little on vocals and instruments, and listen in Delta, because sometimes the overtone is the harsh part.
  • Time Tilt makes the highs react faster than the lows, or the other way round.
  • The six small knobs under DETAIL TILT treat the lows and the highs differently. LOW and HIGH cut harder in their range. ATK L/H and REL L/H make Attack and Release slower or faster there. 1x leaves things unchanged.

Stereo and sidechain

  • Focus chooses which part of a stereo sound Tame works on: both sides, only the left or right, only the centre (Mid) or only the width (Side).
  • Stereo chooses how Tame listens to a stereo sound: left and right separately (L / R), or centre and sides separately (Mid / Side).
  • Stereo Link at 0% lets each side react on its own. At 100% both sides get the same cut.
  • Detector → External lets another track decide what Tame turns down. In your DAW, send that track to Tame's sidechain input. That track's sound is never added to your mix.

Quality and phase

Tame delays your audio slightly so it can listen ahead. Your DAW lines everything up for you automatically.

Quality Use it for
Standard Most mixing.
High A finer result, with a longer delay and more CPU.
Tracking Recording or playing live. It has the shortest delay.
Ultra The smoothest result on moving sounds. It uses the most CPU.

A new Quality takes effect when you stop playback. Until then the bottom of the window says STOP PLAYBACK TO APPLY QUALITY.

Phase can stay on Minimum. Linear can blur sharp hits slightly before they land. Choose by ear.

Presets

Click the preset name at the top to open the library of 58 presets. They're sorted by job: vocals, guitars, drums, keys, synths and bass, the whole mix, and more. A name says the sound and the job, such as "Snare ring" or "Vocal de-ess high". "Light" and "hard" versions go gentler or further. Hover over the preset name to read what it's for.

  • Save current saves your settings as a preset file.
  • Open file loads one.
  • Choosing a preset never changes Quality, Phase or Bypass.

Every preset is a starting point. Listen in Delta to check it suits your sound.

If something isn't right

  • You hear no change: check that Bypass is off and Depth is up. Lower Prominence so Tame catches more.
  • The sound gets dull or loses its punch: lower Depth, raise Transient, or listen in Delta to find what is being removed.
  • The sound pumps or flutters: lengthen Attack and Release.
  • External detection does nothing: check that your DAW is sending audio to Tame's sidechain input. The bottom of the window tells you when there's no sidechain.
Next guide / 06 / 06 Sub-bass generatorUndertone